欧美狠狠插,亚洲AV无码一区二A片变脸,大学生无套流白浆视频大全

The use of hot water radiant panel heating in large industrial buildings is more energy saving

time：2024-01-31
hits：921次
source：正弘奧能

With the development of science and technology, radiation heating equipment has overcome the problem of poor heating effect caused by large area and poor heating property in tall industrial buildings. The infrared radiation heat emitted by the radiation heating equipment is to directly heat the human body or equipment, and then heat the air through the secondary radiation such as the human body or equipment, the heat distribution is uniform, the heating is rapid, it is very suitable for the heating of the tall space plant, and it can achieve different temperature requirements in different areas of the same plant. This not only saves the cost of equipment, but also greatly saves the cost of use. 
 

	In general, the traditional convection heating method requires more than 2 hours of preheating period, which is a great waste of energy, and the hot water radiation panel heating system will have a warm feeling after a few minutes, half an hour or so will reach the required temperature. The workshop will soon cool down after the general heater or central air conditioning switch is turned off, and the hot water radiant panel heating system can maintain the required temperature within two hours of shutdown. In addition, if you use a heater or traditional heating method, the top of the tall space will be evenly heated, but those Spaces actually do not need to be heated, so it also directly causes a waste of energy. Overall, in a heating season, the hot water radiant panel heating system can save 30%-50% energy than the traditional convection heating.


	 


	<img src="http://www.mhsc009.cn/Uploads/image/20240131/20240131093947_44873.png" alt="" />

 
Hot water radiant panels have many important functions, especially when considering the heating of buildings with high ceilings and/or high fire risk, and can be used in the heating of industrial facilities, warehouses, gymnasiums, train repair stations, aircraft hangars, amphitheaters, animal farms, greenhouses, and similar tall space buildings. 
 

	ECOPAN hot water radiant panel, promoted and sold by Beijing Leadway Power Co., LTD., is the most effective heating system with high heat exchange efficiency, small temperature gradient, and uniform hot and cold. In order to reduce this thermal shock, the ECOPAN hot water radiant panel implements a 2m long metal plate module, so that the 4m module is composed of 2 plates and the 6m module is composed of 3 plates. When the 2 meter plates are placed side by side, an expansion joint is formed. The welding point exists in the middle of each 2m sheet, so the expansion on both sides is less than 1mm. This ensures that the panel will not deform during this time.


	 


	<img src="http://www.mhsc009.cn/Uploads/image/20240131/20240131094008_19827.png" alt="" />

 
To meet any need, ECOPAN hot water radiant panels have a very wide range, including models with different distances between pipes (111 mm and 150 mm) and pipe diameters (1/2 and 3/4). Depending on the temperature and pressure of the heating fluid, the pipe itself may be electrically welded or unwelded. Each panel is connected to the hot water supply network via header. With the same dimensional characteristics (pipe diameter, number and spacing, panel width), ECOPAN panels have a higher thermal output than other products on the market. This allows fewer quantities to be used to meet the same required output, saving on material and installation costs.

国产精品视频免费一区_国产迷晕暴力玩弄网站_超碰成人免费_www.狠狠操.com_国产精品一区二区av麻豆_国产又粗又黄又爽又硬的软件

The use of hot water radiant panel heating in large industrial buildings is more energy saving